Sony PCS-5100 Operating Instructions Manual page 120

To check the T.120 rate
7
When using PCS-5100
Double click on "PCS-5100", then click on the [Invite] button.
When using PCS-5100P
Double click on "PCS-5100P", then click on the [Invite] button.
"? You are being invited to a conference called xxxx. Would you like
to attend?" message appears on the monitor at remote users. Then
remote users click on [Yes], the [PCS-XXXX PSTN: NULL Waiting
for response] indication changes to [PCS-XXXX PSTN: NULL
Accepted].
8
Click on [Close].
9
Select [Share Workbook] and [Share Application] from the
[Conference] menu.
The data conference can be held now.
Note
There may be connected in a different rate or not able to be connected
depending on the remote parties'condition of the line or terminal.
If the indication does not appear in step 7, do the following operation to
change the T.120 rate of the FarSite after checking the T.120 rate.
1
Select [OTHER] from the MAIN menu.
The sub-menu appears.
INPUT MULTI
QUICK GRAPH
MENU MENU
2
Select [T.120].
The status of the T.120 rate is indicated.
OFF
3
Select [EXIT].
The MAIN menu appears.
For details on changing the transmission rate of the FarSite, refer to the USER'S
GUIDE supplied with the FarSite package.
Notes
• The T.120 rate indicated in the Rollabout Processor is the transmission
rate between the Rollabout Processor and the PC. The actual T.120 rate is
slower than the rate between Rollabout Processor and the PC.
• Operating speed may be reduced depending on the condition of the line.
SETUP
STATUS
DTMF
T.120
DIAL LIST
MANUAL DIAL
P in P CAMERA POINT AUDIO OTHER
[OTHER]
9600 38400 EXIT
Chapter 4 Operation of Optional Items
END OF
MEETING
4-47