Sony PCS-5100 Operating Instructions Manual page 70

To answer calls in the manual answer mode
When your system is in the manual answer mode, you need to connect
incoming calls manually.
When the Rollabout Processor starts ringing, follow the steps below.
1
If you are operating the system and the "PLEASE GO TO MAIN
MENU TO ANSWER CALL" message appears, finish the current
operation.
The following manual answer menu appears on the screen.
If you cannot receive the call according to your current operations,
ignore it and continue with the current operation.
When the remote party abandons the call, the Rollabout Processor
stops ringing and the manual answer menu disappears.
2
Select [ACCEPT].
The call is connected.
Once the connection is made, the MAIN or QUICK menu appears, the
remote party appears on local TV monitor, local party appears on the
remote TV monitor and meeting becomes possible.
The "MEETING STARTS!" message appears.
If you do not want to receive a call, select [REJECT] from the
manual answer screen in step 1.
The Rollabout Processor unit stops ringing.
If the call fails to be connected, the "CANNOT COMPLETE
CONNECTION" message appears.
ACCEPT REJECT
Chapter 3 Conducting a Meeting
3-9