Table of Contents
Advertisement
Message List
Message
MEMORY CARD IS INVALID (3-digit error number)
PLEASE FORMAT MEMORY CARD
MEMORY CARD IS WRITE PROTECTED
MEMORY IS FULL
MEMORY CARD IS REMOVED
Error messages (numbers) that appear when using a memory card
Error
Definition
number
001
Wrong type of card
004
Blank
006
007
008
009
020
021
No card
022
023
130
Writing error
A-10
Appendix
If any of the following messages appear on the monitor while you are
using the PCS-MC10 Memory Card (not supplied), take the following
steps.
See the error message chart below.
Format the card. See page 4-37.
Switch off the WRITE PROTECT switch on the card. See page 4-41.
Use a new memory card or erase a memo. See pages 4-8, 4-9, 4-16,
4-18.
Insert a memory card. See page 4-37.
Use the PCS-MC10 Memory Card.
No data is recorded on the card.
Memory is full. Erase unwanted data or use a new card.
Use after formatting. See page 4-37.
Use after formatting. See page 4-37.
Use after formatting. See page 4-37.
You have inserted the PCS-UC500 Upgrade Card or PCS-MC10 Memory Card
that has already been used on another PCS-5100/5100P unit.
Install the appropriate card. See page 4-37.
Install the appropriate card. See page 4-37.
You have installed the wrong type of memory card.
Try writing again or use a new card.
Remedy
Remedy
Advertisement
Table of Contents
