Ending A Meeting - Sony PCS-5100 Operating Instructions Manual

Ending a Meeting

You can end a meeting in one of the following two ways:
• Disconnect the call while leaving the main power on to perform other
operations.
• Disconnect the call and turn off the system.
In either case, use the menu to end the meeting.
Pressing the POWER ON button on the Remote Commander or the
SYSTEM ON button on the external microphone kit will not turn off the
power.
Follow the steps below.
If the MAIN menu is displayed, choose the method for finishing the
meeting in step 3.
Note
If the call is disconnected but the system remains on, MEMO is not erased.
Be sure to erase any confidential information contained in MEMO.
When the system is turned off, all documents stored in MEMO are erased.
1
Display the QUICK or MAIN menu.
For details, see "Changing Menus" on page 1-5.
QUICK menu
MAIN OBJECT
P in P
MENU CAM
PRESET
MAIN menu
INPUT MULTI
QUICK GRAPH
MENU MENU
FAR
END
A B C D E F
P in P CAMERA POINT AUDIO OTHER
Chapter 3 Conducting a Meeting
SYSTEM
OFF
END OF
MEETING
(Continued)
3-11