Connecting With Other Parties
To make connection using the multi party index number
There are two ways to connect with a remote party, depending on the
setting method specified in the DIAL SETUP menu. To connect with a
remote party which is not registered, access the party from the MANUAL
Assign one index number for the three (or two) remote parties. Use
this index number to contact the other parties
In the DIAL SETUP menu, record party A in the A1, A2 line; party B in
the B1, B2 line, and C in the C1, C2 line. Select [BRI-M] under [LINE I/
For details on registering remote parties, see page 2-1.
Select each of the registered remote parties to make a connection
Select the parties you want to connect with from the DIAL LIST menu one
Set up each of the unregistered remote parties to make a connection
Set up the parties you want to connect with from the MANUAL DIAL
menu one by one.
Select [OTHER] from the MAIN menu.
The OTHER sub-menu appears.
Select [DIAL LIST].
The DIAL LIST menu appears.
103 Chicago Miami
P in P
Chapter 1 Using the Basic System