Save
Load
NOTE
File key group
Pressing the File key displays the following softkeys for saving a file on and loading
a file from a USB memory connected to the front panel USB-A connector.
Displays the following softkeys for saving a file. Pressing a softkey displays the File
Selection dialog box. See
Measure
Saves a measurement data file.
Math
Saves a math result data file.
Limit Test
Saves a limit test result data file.
Trace
Saves a trace buffer data file.
Config
Saves a system setting data file.
Displays the following softkey for loading a file. Pressing the softkey displays the
File Selection dialog box. See
Config
Loads a system setting data file.
License
Loads a license file.
The license file enables the functions secured by license. To get the file, follow
instructions described in the Software Entitlement Certificate sheet supplied with an
upgrade product B2901AU, B2902AU, B2911AU, or B2912AU.
File Selection dialog box
This dialog box provides the following GUI for saving or loading a file.
Path
Folder name for saving or loading a file.
File Name
File name to save or load.
The files and folders saved in the specified folder are listed in the area between the
Path field and the File Name field. This area can be used for selecting a file by
highlighting its name.
For saving a system setting file, if the file extension is not specified, ".sta" is added
automatically. For saving the other data file, ".csv" is added automatically.
Keysight B2900 User's Guide, Edition 5
"File Selection dialog box" on page
"File Selection dialog box" on page
Front Panel Reference
File key group
4-43.
4-43.
4-43