Table of Contents
Advertisement
WARNING
Installation
Installing the Keysight B2900
Installing the Keysight B2900
This section describes information you must pay attention to when installing the
Keysight B2900.
•
"Safety Considerations"
•
"Environment"
•
"Connecting the Power Cord"
•
"Setting the Power Line Frequency"
•
"Setting Date and Time"
•
"Bench Installation"
•
"Rack Installation"
Safety Considerations
Refer to the Safety Summary page at the beginning of this guide for general safety
information. Before installation or operation, check the B2900 and review this guide
for safety warnings and instructions. Safety warnings for specific procedures are
located at appropriate places throughout this guide.
Environment
Do not operate the instrument in dusty environment, or in the presence of
flammable gases, corrosive gases, or fumes.
Ne pas utiliser l'appareil dans un endroit poussiéreux, ou en présence de gaz
inflammables, corrosifs ou de fumée.
Environmental conditions for the B2900 are described below. The B2900 is
designed for use in indoor facilities.
•
Temperature range
Operating
Storage
•
Humidity range
Operating
3-6
0 C to +55 C
-30 C to +70 C
30 % to 80 %RH, non-condensing
Keysight B2900 User's Guide, Edition 5
Advertisement
Table of Contents
