Festo MS6-SV Operating Instructions Manual page 62

MS6(N)−SV
Type
Residual pressure in normal
operation
Max. residual pressure in event
of fault (worst case)
Standard nominal
flow rate 1 −−> 2
Standard flow rate 2 −−> 3
Min. standard flow rate 2 −−> 3
in event of critical fault
C value
b value
Ambient temperature
Medium temperature
Electrical connection
Voltage supply
Nominal value
Tolerance
Max. current consumption
when switching on
in normal operation
Protection against electric shock
(protection against direct and indirect
contact as per EN 60204−1/IEC 204)
Switching position display
62
MS6−SV
[bar] 0 (no residual pressure)
[bar] 0.4 (if p1 = 10 bar and flow control valve
is fully open)
[l/min] 4 300 (if p1 = 6 bar, p2 = 5 bar)
[l/min] 9 000 (if p1 = 6 bar)
[l/min] 6 000 (if p1 = 6 bar)
[l/(s*bar)] 19.3
0.21
[°C] −10 +50 (0
[°C] −10 +50 (0
Sub−D, 9−pin
(the product may only be operated with
the corresponding multi−pin plug
sockets NECA−S1G9−P9−MP )
[V DC] 24
[V DC] 21.6 26.4
[A] 1.0
[A] 0.12
by means of PELV power supply unit
LED and floating contact
MS6N−SV
+50 with pressure sensor)
+50 with pressure sensor)
Festo MS6(N)−SV 0904a English