Festo MS6-SV Operating Instructions Manual page 53

MS6(N)−SV
Input and output switching characteristics in normal operation (when the Automatic start"
operation mode is set) for NECA−S1G9−P9−MP1 multi−pin plug socket
Operat. pressure p1
Output pressure p2
+L1: Operating voltage
EN1: Enable signal 1
EN2: Enable signal 2
13/14:
Signal contacts
Power LED (green)
Fault LED (red)
Fig. 13
Venting and output of an error message occurs when:
EN1 EN2 for at least 12 ms
S
The diagrams on the next page show the precise switching characteristics of the Enable signals
EN1 and EN2 with a time offset. The maximum reaction time can be derived from the delay
between the two signals.
Festo MS6(N)−SV 0904a English
53