Editing Or Deleting Entries; Calculator Mode - Sharp ZQ-P20 Operation Manual

Editing or deleting entries – Telephone,
Schedule, To Do, Memo –
Editing
1. Recall the entry to be edited.
2. Tap . The cursor starts to flash.
EDIT
3. Tap , , , or to move the cursor to the position to be
edited.
4. Enter, insert, or delete characters (refer to "Entering Characters").
• To cancel editing, tap
C•CE
5. Press several times (until "STORED!" appears briefly) to
ENTER
finish editing and to store the entry.
Deleting
1. Recall the entry to be deleted.
2. Tap .
DEL
• "DELETE?" is displayed.
• To cancel the deletion operation, tap f.
3. Press to delete the entry.
ENTER
10
.

Calculator Mode

The Organizer can calculate numbers of up
to 10 digits. Tap
CALC/CONV
to display the Calculator mode screen
(Calculator → Currency conversion → Unit
conversion → Calculator...).
Calculation
Be sure to tap , , and
C•CE C•CE
memory before performing a calculation.
Note
is tapped, the respective symbol, +, –, ×, or ÷
• When , , , or
is displayed. (In the examples in this manual, these symbols are not
described.)
If an error occurs
If the calculation result or the integer section in the numerical value in
the memory exceeds 10 digits or if a number is divided by zero (0), an
error occurs ("ERR" is displayed).
several times
to clear the display and
CM
2nd
0.