Connecting The Actuators - Festo CP-E16...M Series Manual

3. Output modules type CP−A08...−M12−...

3.3.1 Connecting the actuators

1
Pin assignment
1: n.c.
2: n.c.
3. 0 V
4: Ax+1
2
Pin assignment
1: n.c.
2: n.c.
3. 0 V
4: Ax
n.c. = not connected
(not connected)
Ax = Output x
Fig. 3/3: Pin assignment of output module CP−A08...−M12−...
3−6
Use plugs with union nuts with M12 thread for connecting the
actuators. Fasten the plugs with the aid of the union nut in
order to prevent unintentional loosening, e.g. due to shock.
Seal the unused connections with the protective caps sup
plied. Only in this way can you comply with protection class
IP65.
Pin assignment of the actuator connections on the
CP−A08−M12−... (PNP outputs)
4
3
1
2
Ax+1
Ax
2
1
3
4
Festo P.BE−CPEA−EN en 0802e
1
2