Fitting - Festo CP-E16...M Series Manual

3. Output modules type CP−A08...−M12−...
3.2

Fitting

Fitting onto a wall
Fitting onto a hat rail
3−4
The output module is intended for fitting onto a wall and a
hat rail. It requires a mounting area of approx. 173 x 78 mm.
The diagram below shows the dimensions for the four
threaded holes of M4 screw size.
Fig. 3/2: Fitting dimensions for output module
CP−A08...−M12−...
The procedure for fitting onto a hat rail is the same as with
the input modules type CP−E16...−M... (see section 1.2).
163.9 mm
Festo P.BE−CPEA−EN en 0802e
63 mm