Connecting The Separate Power Supply For The Sensors - Festo CP-E16...M Series Manual

2. Input module type CP−E16−KL−IP20−Z

2.3.2 Connecting the separate power supply for the sensors

2−10
Warning
S Use only PELV circuits as per IEC/DIN EN 60204−1 (Pro
tective Extra−Low Voltage, PELV) for the electrical supply.
Consider also the general requirements for PELV circuits
in accordance with IEC/DIN EN 60204−1.
S Use power supplies which guarantee reliable electrical
isolation of the operating voltage as per IEC/DIN EN
60204−1.
By the use of PELV circuits, protection against electric shock
(protection against direct and indirect contact) is guaranteed
in accordance with IEC/EN 60204−1 (Electrical equipment for
machines, General requirements).
The CP input module must be earthed to ensure that it func
tions correctly (e.g. EMC).
The sensors are supplied with + 24 V DC via the connection
for the sensor supply. The module enables sensors with high
current consumption to be connected (max. 1 A per input
module).
Festo P.BE−CPEA−EN en 0802e