Notes On The Use Of This Manual - Festo CP-E16...M Series Manual

Contents and general instructions

Notes on the use of this manual

Festo P.BE−CPEA−EN en 0802e
CP I/O modules are available in the designs PNP (positive−
switching) and NPN (negative−switching). The positive−switch
ing modules with M12 connectors are available in 4−pin and
5−pin designs. The 5−pin design offers an earthing connection.
This manual contains general basic information on the
method of operation, and on fitting, installing and commis
sioning CP systems.
This manual refers to:
Information on further modules, as well as basic information
which must be observed in conjunction with the higher−order
system, can be found in the manuals for the relevant systems.
Input modules
PNP:
CP−E16−M8
CP−E16−M12x2
CP−E16−M12x2−5POL
NPN:
CP−E16N−M8
CP−E16N−M12x2
PNP or NPN:
CP−E16−M8−Z
CP−E16−KL−IP20−Z
Output modules
PNP:
CP−A08−M12
CP−A08−M12−5POL
NPN:
CP−A08N−M12
IX