Control Elements; Connecting Components - Festo CPX-E-4IOL Manual

2 Function
2.1.3

Control elements

The address space (inputs/outputs) provided by the module is set using DIL switches è Tab. 2.1.
Switch position combinations that are not listed lead to an error (error number 204).
DIL switch
1) Factory setting
2) Only Port 1 [X0] and Port 2 [X1] active
3) Only Port 1 [X0] active
Tab. 2.1
2.1.4

Connecting components

Port [X0] ... [X3]
Tab. 2.2
1)
Connection [XD]
1) The connections XD.0 and XD.1 and also XD.2 and XD.3 are interconnected in the terminal strip.
Tab. 2.3
Festo – CPX-E-4IOL-...-EN – 2017-07 – English
1 2 3 4
OFF Off Off Off
ON Off Off Off
OFF ON Off Off
ON ON OFF ON
OFF Off ON OFF
Signal Description
0/1 C/Q Standard IO (in SIO mode) or IO-Link communication
(in IOL mode)
2 L+ +24 V DC operating voltage supply U
3 P24 +24 V DC load voltage supply U
4 L– 0 V DC operating voltage supply U
5 N24 0 V DC load voltage supply U
Signal
0 +24 V DC load voltage supply U
1
2 0 V DC load voltage supply U
3
5 6 ... 8 Address space [byte]
Per port
1)
Off OFF 2 I/2 O
Off OFF 4 I/4 O
Off OFF 8 I/8 O
2)
Off OFF 16 I/16 O
3)
ON OFF 32 I/32 O
EL/SEN
OUT
EL/SEN
OUT
OUT
OUT
Module
1)
8 I/8 O
16 I/16 O
32 I/32 O
7