Table of Contents
Advertisement
VIFB8 - 03/05
9809c
3. Installation
Connecting the cables to the plugs/sockets
CAUTION
The position of the pins is different depending
on whether plugs or sockets are used.
•
The connections of the input and output
modules are in the form of sockets.
•
The connections of the RIO interface
and those of the operating voltage
connection are in the form of plugs.
PLEASE NOTE
If one of the connections is not used, it
should be sealed with a protective cap (IP 65).
When you have selected suitable cables, connect
them according to steps 1 ... 7 as follows:
1. Open the plugs/sockets (see diagram):
•
Power supply socket:
Insert the power supply socket into the
operating voltage connection on the valve
terminal. Unscrew the housing of the socket,
then remove the connection part of the socket
which you have inserted into the operating
voltage connection.
•
Sensor plug and RIO connection socket:
Unscrew the centre knurled nut.
3-5
Advertisement
Table of Contents
