2. Input module type CP−E16−KL−IP20−Z
2.2
Fitting
Fitting onto a wall
1
Input module,
type
CP−E16−KL−IP20−Z
Festo P.BE−CPEA−EN en 0802e
The input module is intended for fitting onto a wall or a hat
rail. If you are fitting the module onto a wall, you will require
the following space:
Type
CP−E16−KL−IP20−Z
The diagram below shows the dimensions for the four
threaded holes of M4 screw size. You should fasten the
module with at least 3 screws.
1
Fig. 2/2: Mounting dimensions for CP−E16...−M...−...
Mounting surface
Approx. 175 x 66 mm
166 mm
2−5