Connecting The Output Module - Festo CP-E16...M Series Manual

3. Output modules type CP−A08...−M12−...

3.3.2 Connecting the output module

Festo P.BE−CPEA−EN en 0802e
Warning
Please observe the maximum string lengths. You can
thereby avoid errors in data exchange between the output
module and the higher−order system (e.g. field bus nodes).
Use only the following original cables for connecting the
modules:
For connection
to:
Field bus node
with CP connec
tion
Axis interface
type SPC−AIF−...
Powerbox type
CP−FB−TBOX−...
Communication and the necessary operating voltage for the
internal electronics of the module are carried out via the CP
cable.
The output module is connected directly to the CP connection
of the higher−order system (field bus node, axis interface or
Powerbox). Detailed information can be found in the relevant
system manual.
max. permitted
string length
10 m
See manual for the
SPC200
type P.BE−SPC200−...
See manual for the
higher−order system
Cable type
KVI−CP−1−...
or
KVI−CP−2−... (suit
able for drag chain) able for drag chain)
3−13