Connecting The Input Module - Festo CP-E16...M Series Manual

1. Input modules type CP−E16...−M...−...

1.3.4 Connecting the input module

1−26
Caution
Please observe the maximum permitted string lengths. You
can thereby avoid errors in data exchange between the
input module and the higher−order system (e.g. field bus
node).
Use only the following original cables for connecting the
modules:
For connection
to:
Field bus node
with CP connection
Axis interface
type SPC−AIF−...
Powerbox type
CP−FB−TBOX−...
The following functions are provided for the module via the
CP cable:
Operating voltage for the internal electronics
Connection for data exchange
in the case of input modules without connection for sup
plying the sensors:
Operating voltage for the connected sensors.
max. permitted string
length
10 m
See manual for the
SPC200
type P.BE−SPC200−...
See manual for the
higher−order system
Cable type
KVI−CP−1−...
or
KVI−CP−2−... KVI CP 2
(suitable for
drag chain)
Festo P.BE−CPEA−EN en 0802e