Connecting The Actuators - Festo CP-E08-M12-CL Manual

3. Output modules type CP−A04−M12−CL

3.3.1 Connecting the actuators

1
Pin assignment
Connection 1
1: n.c.
2: Ox+1
3: 0 V
4: Ox+0
5: FE
5
Internal connection in the module
Fig. 3/3: Pin assignment type CP−A04−M12−CL
Festo P.BE−CPEA−CL−EN en 0404NH
For connecting the actuators, use plugs and cables with union
nut and M12 thread from the Festo range (see Appendix A.5).
Tighten the plugs with the aid of the union nut in order to
·
prevent unintentional loosening, e.g. due to shock.
Seal unused connections with the protective caps sup
·
plied. Only in this way can you comply with protection
class IP65/IP67.
Pin assignment
The following diagram shows as an example the pin assign
ment of the actuator connections on the CP output module.
1 5
Connection 1
2
Pin assignment
Connection 2
1: n.c.
2: n.c.
3: 0 V
4: Ox+1
5: FE
2 3
Connection 2 Connection 3
3
Pin assignment
Connection 3
1: n.c.
2: Ox+3
3: 0 V
4: Ox+2
5: FE
n.c.= (not connected)
Ox = output x
5 4
Connection 4
4
Pin assignment
Connection 4
1: n.c.
2: n.c.
3: 0 V
4: Ox+3
5: FE
3−7