Instructions On Commissioning - Festo CP-E16...M Series Manual

1. Input modules type CP−E16...−M...−...
1.4

Instructions on commissioning

Status LED
1−28
Warning
Please be careful if the string assignment is modified at a
later stage.
After saving the string assignment/hardware configur
ation, check the address assignments of your higher−order
system before starting user programs.
You can thereby avoid:
addressing errors with unintentionally incorrectly fitted
CP modules.
When the string assignment on CP field bus nodes has been
modified (CP modules added or removed), you must save the
new string assignment by pressing the SAVE button on the
node. Proceed here as described in the manual CP system,
installation and commissioning".
When the string assignment has been modified on the
SPC200, the new hardware configuration must also be saved.
Proceed here as described in the manual for the SPC200 or in
the WinPISA manual.
The operating status of the input module is indicated by the
status LED on the CP connection (see table below).
Festo P.BE−CPEA−EN en 0802e