Speed Reference; Miscellaneous Drive Control - ABB FBIP-21 BACnet/IP User Manual

38 Start-up

Speed reference

For using the fieldbus to provide input speed references to the
drive, configure the following drive parameters and set the fieldbus
controller supplied reference word(s) in the appropriate location:
Drive parameter
19.11 Ext1/Ext2
selection
22.11 Ext1 speed
ref1
22.18 Ext2 speed
ref1
46.01 Speed
scaling
50.04 FBA A ref1
type/50.05 FBA A
ref2 type
1)
As example


Miscellaneous drive control

To use the fieldbus for different drive control functions, configure
the following drive parameters and set the fieldbus controller
supplied command(s) in the appropriate location:
Drive parameter
20.40 Run permissive Fieldbus
20.01 Ext1
commands/
20.06 Ext2
commands
Value Description
2 = FBA A Reference set
MCW bit selection by fieldbus
1)
3 =FBA ref1 Speed reference
source 1
1)
5 =FBA ref2 Speed reference
source 2
1)
1500 rpm 16-bit scaling of
speed-related
parameters
0 = Speed or References (1 or 2)
frequency type for scaling
4 = Speed defined in parameter
46.02 Frequency
scaling
Value Description
Run permission by
adapter fieldbus
Fieldbus A Fault reset by fieldbus BV14
BACnet
access point
BV13
AV16
AV17
AV16/AV17
AV16/AV17
BACnet
access point
BV12