Fault Queue For Drive Diagnostics - ABB FBIP-21 BACnet/IP User Manual

Drive parameter
01.53 Previous day
kWh


Fault queue for drive diagnostics

Faults specific to fieldbus control are listed below:
For general ACH580 diagnostics information, see the Diagnostics
section in the ACH580 User's manual.
Drive parameter
04.01 Tripping
fault
04.11 Latest fault
04.12 2nd last
fault
Description
Previous day energy
consumption. The value 01.52
Current day kWh is stored here
when its value has been
cumulated for 24 hours.
The value is set to the value
before the power cycle when the
drive is again up and running
Description
Fault that caused the current trip
Code of the first stored (non-active)
fault
Code of the second stored (non-
active) fault
Start-up 45
BACnet
access point
AV133
BACnet
access point
AV18
AV19
AV20