ABB FBIP-21 BACnet/IP User Manual page 44

44 Start-up
Drive parameter
05.11 Inverter
temperature
01.20 Inverter kWh
counter
35.01 Motor
estimated
temperature
01.03 Motor speed
%
01.50 Current hour
kWh
01.51 Previous hour
kWh
01.52 Current day
kWh
Description
Estimated drive temperature in
percent of fault limit
Amount of energy that has
passed through the drive (in
either direction) in full kilowatt-
hours. Whenever the counter
rolls over, 01.19 Inverter MWh
counter is incremented. The
minimum value is zero.
Displays the motor temperature
as estimated by the internal
motor thermal protection model
Motor speed in percent of the
synchronous motor speed.
Current hour energy
consumption. This is the energy
of the last 60 minutes (not
necessarily continuous) the drive
has been running, not the energy
of a calendar hour. The value is
set to the value before the power
cycle when the drive is again up
and running.
Previous hour energy
consumption. The value 01.50
Current hour kWh is stored here
when its values has been
cumulated for 60 minutes.
The value is set to the value
before the power cycle when the
drive is again up and running.
Current day energy consumption.
The value 01.51 Previous hour
kWh is stored here when its value
has been cumulated for 24 hours.
The value is set to the value
before the power cycle when the
drive is again up and running.
BACnet
access point
AV7
AV9
AV15
AV31
AV130
AV131
AV132