4. Electrical
4.1 ADF Controller PCB
4.1.1 Removing the ADF controller PCB
1) Detach the rear cover.
2) Pull out all ADF controller PCB con-
nectors.
3) Remove screw [1] to release the ADF
controller PCB.
4.2 Feed Station Sensors
4.2.1 Removing the sensor assembly
1) Remove the feed station.
2) Remove the reversal delivery roller, up-
per, read roller 2, and read roller 1.
3) Remove two screws [1] to release sen-
sor assembly [2].
COPYRIGHT © 2001 CANON INC.
2000 2000 2000 2000
CANON DADF-H1 REV.0 MAR. 2001
CHAPTER 3 MECHANICAL SYSTEMS
F03-401-01
[1]
[2]
F03-402-01
[1]
3-27