Control Cabinet Installation; Rail Installation - Panasonic Aquarea PAW-HPM1 Installation And Commissioning Manual

7.1.2 Control Cabinet Installation

The HPM can to be installed on the mounting plate of a switch cabinet or a conventional heat
source (if available).
The controller fits in a recess opening with DIN dimensions (138 x 192 mm). It is installed as
follows:
► Push the controller through the recess opening in the mounting plate of the
► Attach the controller using by means of the wings.
This installation method does not require tools or attachment material.
Fig. 7.2: Installation of the controller in a control cabinet
1 Wing for switch cabinet installation

7.1.3 Rail Installation

The base of the HPM controller can be clamped onto a DIN rail (35 mm) in a switch cabinet or
other fixture.
This installation method does not require tools or attachment material.
Fig. 7.3: Installation of the controller on a rail
1 Dog point for rail installation
Aquarea Heat Pump Manager (HPM) – Manual Part 1: Installation and Commissioning – 12/2014
switch cabinetor the conventional heat source.
Installation and Terminal Assignments
1
1
2 DIN Rail
2
47
7