Brief Instructions For The User - Panasonic Aquarea PAW-HPM1 Installation And Commissioning Manual

2

Brief Instructions for the User

!
Important notice
This Chapter is mainly intended for the end-user of the heating system. Only the most important
user functions and settings are described in the brief instructions.
► Installation and commissioning may only be carried out by qualified technicians.
Information for using the brief instructions
The following brief instructions are a compilation of the most important user functions for the
end user. Each section contains a reference to the detailed description in the following chapters.
The user must contact an experienced installer or dealer if this information is not sufficient to
operate the controller.
Operating elements
7
6
5
Fig. 2.1: Operating elements – Basic Display (left) and Buttons (right)
Basic Display
1 Time
2 Week day
3 Date
4 Operating mode switch
5 Status for WEB interface
6 HPM model
7 Maintenance function (here, none is shown)
For all operating procedures described in this manual, the basic display of the display is the
start (→ Operating Elements, P. 34).
Aquarea Heat Pump Manager (HPM) – Manual Part 1: Installation and Commissioning – 12/2014
The information and procedures required for this are described in Chapter
3 to 10.
1
Brief Instructions for the User
2 3
4
Buttons
[▲]
A Button
[–]
B Button
[OK]
C Button
[+]
D Button
[▼]
E Button
(up)
(Minus)
(Plus)
(down)
2
A
B
C
D
E
9