Initial Loading - Panasonic Aquarea PAW-HPM1 Installation And Commissioning Manual

Commissioning
!

8.2.1 Initial loading

8
70
Important notice
No complete configuration during power supply interruption!
The configuration will not be completed during power interruptions and the automatic
configuration must be performed again (→ Repeat loading, P. 77).
The HPM controller detects at switch-on whether a system diagram is loaded or not. The user is
prompted to select the display language and scheme, if no system diagram is loaded.
Procedure during initial loading
Switching on controller and selecting display language
► Switch on controller and watch display until the input prompt for the display
language appears.
► Select desired display language.
The basic setting is German. The language setting can be changed using the
[+] [–]
and buttons, Changes are possible at any time in the Global » Service
» Software menu (even during operation).
► Confirm language setting using
► Watch the display until the following appears:
Please set all system data. Then load scheme with cold start = 1.
► Confirm setting using the
The display switches automatically to the System diagrams menu.
 
sysDiagram (system diagram) is marked.
Aquarea Heat Pump Manager (HPM) – Manual Part 1: Installation and Commissioning – 12/2014
[OK]
[OK]
button.