Setting The Center Module; Installation Settings [Installation Settings]; Setting The Date And Time; Setting The Current Date And Time - Panasonic WX-CC412BP Operating Instructions Manual

Setting the Center Module

This function is used to select an item to set from the
Settings screen and perform the required settings.
w Installation settings
w
[Installation Settings]
This function is used to perform the basic settings for this
unit. Be sure to perform these settings after installing this
unit.
w Setting the date and time
w
This function is used to set the date, time, and daylight
saving time for the Center Module.
w Setting the current date and
w
time
This function is used to set the current date and time for the
Center Module.
1
On the Settings screen, touch the [Installation
Settings] button, and then the [Date & Time]
button.
2
Input the current year, month, date, hour, and
minute.
w p The date and time display on the LCD display is
updated. For the inputting method, refer to "Inputting
the date and time" (p.8). You can input the date and
time from 2013/1/1/00:00 to 2035/12/31/23:59.
Important
w p The date and time on this unit is set with the following
order: month / day / year hour:minute
w p The time is displayed as a 24-hour clock.
w p The date and time on the LCD display are also
displayed according to the above rules.
3
Touch the [Set] button.
w p The current date and time displayed on the LCD
display are updated.
Note
w p If you set daylight saving time while setting the date
and time, a warning screen is displayed. Before
setting daylight saving time, complete the date and
time setting.
w p After the date and time are set, if you turn the
power OFF and then ON after 1/1/2036, they will
be initialized to 1/1/2000. On and after 2036/1/1,
schedule functions such as the greeter message and
reminder message do not operate.
10