6.6.7 Modify Basic Display
The elements of the basic display may only be changed by qualified technicians. To access
the menu to change the basic display, access level 4 (service) with the access code 4 5555 is
required (→ Access Codes, P. 36).
The elements of the basic display can be changed as follows.
► Starting from the basic display: Press
► Using the
► Starting from the basic display: press the
► Using the [▲] and [▼] buttons, select the Global »Structure» Display and
► Set terminal number (Terminal), brief descriptionshortDes) and value.
► Confirm settings using the
► Press the
Aquarea Heat Pump Manager (HPM) – Manual Part 1: Installation and Commissioning – 12/2014
prompt to enter the access code is shown.
[+]
[–]
buttons, enter the numbers of the access code 5555
and
individually and confirm each with the
The display shows the access level (Access level: 4: service) for several
seconds and then returns to the basic display.
the menu structure.
[OK]
confirm using the
button.
It is now possible to change the elements for the basic display in the Display
sub-menu.
It is possible to enter current sensor values, control messages and/or clear text
(e.g. service phone number).
[▲]
button several times to return to the basic display.
The display then shows the changed elements of the basic display.
[OK]
button for a few seconds until the
[OK]
button.
[OK]
button and then the
[OK]
button.
Technical Description
[▲]
to open
45
6