Interface "Ext. Display; Bus" Interface; Web" Interface - Panasonic Aquarea PAW-HPM1 Installation And Commissioning Manual

Heat pump manager (hpm)
Table of Contents

Advertisement

6.4.1 Interface "ext. Display"

This interface (1) is labelled in the terminal connection diagram on the rear of the controller with
the description "ext. Display".
The interface is exclusively used to connect the external display with the touch screen (PAW-
HPMED). The external display is connected to the interface via a cable with RJ-11 plug-in
connection.
A room temperature sensor and a remote setpoint transmitter are part of the external display's
scope of delivery.
i
Notice
This interface is also is also referred to as "RS-485 interface (for the connection of external
control units)" in the HPM Manual Part 2.

6.4.2 "BUS" Interface

This interface (2) is labelled in the terminal connection diagram on the inside of the controller
with the description "BUS".
The communication with the heat pumps is done via this interface. Depending on the heat pump
type, a matching adapter cable is required to connect a heat pump to a controller. The adapter
cable is connected to the interface using a bus terminal.
Matching adapter cable for heat pump types
Heat pump type
Compact heat pump
Split heat pumps (older generations)
Split heat pumps from the new Model generation "F"
(including All in One split heat pumps)
If the heat pump is controlled via the adapter cable to the BUS interface, then the HPM replaces
the control panel of the heat pump completely, i.e. all the settings of the heat pump are made at
the HPM.
i
Notice
This interface is also is also referred to as RS-485 interface "(for the connection with the heat
pump)" in the HPM Manual Part 2.

6.4.3 "WEB" Interface

This interface (3) is labelled in the terminal connection diagram on the inside of the controller
with the description "WEB".
Via this interface, the controller can be integrated into a communication network (LAN) that can
be connected to the internet. The network cable is connected to the interface using an Ethernet
plug-in connection.
Aquarea Heat Pump Manager (HPM) – Manual Part 1: Installation and Commissioning – 12/2014
Technical Description
Adapter cable
PAW-HPMINT-M
PAW-HPMINT-U
PAW-HPMINT-F
Length
30 m
3 m
3 m
33
6

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aquarea paw-hpm2

Table of Contents