Panasonic Aquarea PAW-HPM1 Installation And Commissioning Manual page 11

System Survey: viewing and adjusting important parameters
The system survey provides a quick overview of the current state of the system (operating state,
fault state and setpoint / current values of respective system parts) and an option for adjusting
the following setpoints:
● in the system part heatC. 1 and heatC. 2:
● in the system part domestic hot water:
Procedure to change the parameters (short):
► Starting from the basic display: Press the
► Using the
► Using the
► Change parameter using the
► Confirm setting with the
 
Detailed description: → System Survey, P. 41
Party functions: extend occupation times once
The occupation time can be extended once for a special event without having to change the
regular occupation times. Such a deviation from the normal operation is called a party function
and is available for the following consumer circuits:
● Heating circuits (PartyHC2, PartyHC2)
● Domestic hot water circuitsLoading DomHotWater)
Procedure to change the party function (short):
► Starting from the basic display: Press the
► Using the
► Modify the setting using the
► Confirm setting with the
 
Detailed description: → Party Functions, P. 42
Aquarea Heat Pump Manager (HPM) – Manual Part 1: Installation and Commissioning – 12/2014
● Room temperature setpoint for occupation time 1 and 2 (roomOT1,
roomOT2)
● Room temperature setpoint for the non-occupation period (roomNO), e.g. to
lower for nighttime, vacation/absences, etc.
● Domestic hot water setpoint for occupation time 1 and 2 (SP-OT1, SP-OT2)
● Domestic hot water setpoint for the non-occupation period (SP-NO)
[▲] [▼]
and button, select the desired system part:
HeatC. 1, heatC. 2 or domestic hot water. Only the installed system parts are
displayed.
[▲] [▼]
and button, select the desired parameter.
The possible parameters are listed above. Only the parameters of the installed
system parts are displayed.
[OK]
The parameter is shown with the changed value.
[▲] [▼]
and buttons, select the desired consumer circuit.
The possible consumer circuits are listed above.
[OK]
The party function is displayed with the changed setting.
Brief Instructions for the User
[–]
button.
[+] [–]
and buttons.
button.
[▼]
button.
[+] [–]
and buttons.
button.
2
11