Description On System Utility; Overview - NEC Express5800 Series User Manual

Chapter 3 Setup
2.

Description on System Utility

Here we describe System Utility. You need to fully understand the content and configure correctly.
2.1

Overview

System Utility is a utility to set up this device. This utility is installed in a flash memory in the server as standard
and can be run without requiring a media for boot.
Since the device is delivered with optimum set-up, in almost all cases no change is required. Use only when
the case applies to any of cases described in Chapter 3 (2.4 Cases that Require Configuration).
By using System Utility, wide variety of set-ups as follows become possible.

Configuration of the system device and options installed.

Enabling and disabling system functions

Display of system information

Selection of Primary Boot Controller

Configuration of Memory Option

Selection of language

Start of pre-boot environment such as built-in UEFI shell or EXPRESSBUILDER.
Regarding the details of System Utility, see Chapter 2 (1. System Utilities) of Maintenance Guide.
148
Express5800/R120h-1E User's Guide
2. Description on System Utility