Print Format Of Test Values; Data Transmission - wtw MultiLab P5 Operation Manual

Print format of test values

Printer 80 characters/line or interface command format
3 characters serial number or identification no.
(is dropped in case of interface command)
1 space
(is dropped in case of interface command)
5 characters method indication
1 space
17 characters date and time
1 space
3 characters special signs: ! (for sample blank value or offset
correction),
meas. range)
1 space
9 characters test value
1 space
8 characters unit
1 space
5 characters indication form
1 space
4 characters temperature (not for photometric measurements)
1 space
2 characters °C (not for photometric measurements)

Data transmission

Baud rate
Data bits
Stop bits
Parity
Handshake
max. cable length
Font
BA61101/08.00/IWa/MLP5-E2
Documentation
F (for slope correction),* (for measurements out of the
1200
8
1
none
Hardware
15 m
IBM, separation by blanks
175