wtw MultiLab P5 Operation Manual page 226

BSB5
BSB5 Anf.mess.
Cal Error
BSB5 Endmess.
Cal Error
BSB5
BOD5 aktiv
Ãmeth.
BOD
BOD5 time zero
Cal Error
BOD5 after 5d.
Cal Error
226
Troubleshooting
Initial measurement:
Missing calibration data.
- Possible cause / Action:
- RESET performed / Calibrate
- Initial setup / Calibrate
Final measurement:
Missing calibration data.
- Possible cause / Action:
- RESET performed / Calibrate
- Initial setup / Calibrate
Procedure BSB5 measurement:
Databank set up for measurements
according to the ISO standard.
Action: Erase databank.
ATTENTION, all data of BOD5
measurements will be lost!
Initial measurement:
Missing calibration data.
- Possible cause / Action:
- RESET performed / Calibrate
- Initial setup / Calibrate
Final measurement:
Missing calibration data.
- Possible cause / Action:
- RESET performed / Calibrate
- Initial setup / Calibrate
BA61101/08.00/Pla/MLP5-E2