Minimum cuvette filling
Cuvette
l 14 mm vial
¨ 10 mm rectangular cuvette
¨ 20 mm rectangular cuvette
¨ 50 mm rectangular cuvette
Placing of cuvettes in the cuvette compartment
Insert cuvette again and take care of right and
correct position.
30
Explanation of control elements
Place cuvettes into cuvette compartment acc. to
indications on the MultiLab P5.
In case of wrong placing of the cuvette incorrect
measurements may occur.
Place cuvettes in the compartment down to stop .
The error message:
Min.
Filling capacity
[ml]
2.6 ml
2.0 ml
4.0 ml
10 ml
indicates a wrong insertion.
BA61101/08.00/Pla/MLP5-E2
Min.
Filling height
[mm]
20 mm
20 mm
20 mm
20 mm