Table of Contents
Advertisement
1-6
1.11: Output Stacker - Reject Area
The OUTPUT STACKER is a vertical storage device. The upper portion holds all of the
acceptably produced cards. If the card is a reject it falls into the lower reject area. The
stacker can hold 500 acceptable .030" cards. The Reject tray holds fifteen rejected cards.
Fingers should never be placed into the hopper when the system is in
! Caution:
operation. Fingers can be injured by this mechanism when it is pushing a
card up into the hopper.
ATTENTION!
1.12: Liquid Crystal Display:
The LIQUID CRYSTAL DISPLAY (LCD) is a two line, eighty (80) character display (2 lines of 40
characters each), installed on the front of the machine. It is used to provide operator prompts,
selection options during the utilities command functions, error messages, and the like. When
used for data entry it displays keyboard entries.
1.13: Operator Control Panel
The operator control panel consists of four (4) push button switches as shown in Figure 1-3
and their functions are defined in Table 1-1.
Command Button
WAIT
ONLINE
SW1
RESETS
General Description
Les doigts ne devraient jamais être placés dans le distributeur lorsque
le système est en marche. Les doigts peuvent être blessés par ce
mécanisme quand il pousse une carte hors du distributeur vers le
système de transport.
D-40 Front Panel Button Selection
Suspends machine operation AFTER the current card.
Places unit online to a host over a network.
Application specific.
Resets the print mechanism and menu. (The machine can also
be reset by pressing [CTRL] + [A] keys.)
Table 1-1
NBS Technologies Inc.
Button Function
Chapter 1 Page 6
Hide quick links:
Advertisement
Table of Contents
