NBS Technologies ImageMaster D-40 Operation Manual page 30

D-40 Operation Manual
Accept...............
Fixed Text.........
Accept...............
Pad character.....
Auto advance......
Prompt................
Min characters...
Max characters..
Default text.......
Allow..................
Accept...............
Max characters..
4.6.7.a: Pad Character
"Pad characters" are the characters used to fill in the maximum character locations when the
data entered does not meet the maximum size of the field. Choices for this parameter are
either "None" or "Spaces".
4.6.7.b: Auto Advance
The "Auto advance" parameter refers to moving the cursor to the next field automatically
when data is typed in at the time of card production, rather than having to manually depress
the entry key to do the same thing. When enabled, the auto advancement only takes place
after the maximum character amount for the field is reached. Choices for this parameter are
either "No" or "Yes".
Chapter 4 Page 11
Fixed
_ _ _ _ _ _ _ _ _ _ _ _ _(Typed in when field is created.)
"Fixed" Accept fields
Variable
None / Space
No / Yes
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ (up to 35 characters)
_ _ _
_ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ (up to 45 characters)
All / Digits / Alpha
"Variable" Accept fields
Host
_ _ _
"Host" Accept fields
Figure 4-11 Accept fields
4-11
Creating Layouts