Table of Contents
Advertisement
1-4
The ON/OFF switch is located at the rear of the unit, along with the various communication
connections. The depressed side of the rocker switch is the enabled function. With the "I"
depressed the system is ON. With the "O" depressed the unit is OFF.
The basic D-40 printer consists of the following major components:
•
Card input hopper
•
Card transport mechanism
•
Card cleaning mechanism
•
An optional magnetic encoder
•
An optional SmartCard programming station
•
Flipper mechanism
•
Thermal printer
•
Card output hopper
•
Reject tray
•
Forty (40) character each two (2) line LCD display
•
Four button control switch panel
•
Four serial 9 pin female PORT Communication connectors
•
Network port connector
•
AT style keyboard and connector
An Imagemaster™ D-40 configuration may also include a PC acting as a host or source of
the data used to produce cards.
The following brief descriptions are presented in the order of card movement through the unit.
1-4 Input Hopper
The INPUT HOPPER accepts CR-80 cards, with the capacity to hold at least 500 blank cards
(amount depending on thickness). The base of the hopper contains a Card Picker Assembly.
! Caution:
ATTENTION!
1.5: Card Transport System:
The CARD TRANSPORT SYSTEM consists of transport motors, a series of sprockets and
belts, and rubber rollers that will move the card in either direction as required.
General Description
Fingers should never be placed into the hopper when the system is
in operation. Fingers can be injured by this mechanism when it is
pushing a card out of the hopper and into the Transport System.
Les doigts ne devraient jamais être placés dans le distributeur lorsque
le système est en marche. Les doigts peuvent être blessés par ce
mécanisme quand il pousse une carte hors du distributeur vers le
système de transport.
NBS Technologies Inc.
Chapter 1 Page 4
Hide quick links:
Advertisement
Table of Contents
