② Install Software for Network Printer JAVELIN DNA (Manual Feeding, Double-sided Printing) ③ Configure Networking Settings JAVELIN DNA Pro (Auto Feeding, Single-sided Printing, 1 Input hopper) 1)Network Configuration Window 2) DHCP (Dynamic Host Configuration Protocol)? JAVELIN DNA Pro (Auto Feeding, Single-sided Printing, 2 Input hoppers)
Page 3
① Dimensions (Width x Length x Height) & Weight 1) Clean the Inside of the Printer Using Alcohol Swab 1) JAVELIN DNA (Manual Feed) 2) Clean the Printer's TPH Using Alcohol Swab 2) JAVELIN DNA Pro (Auto Feed) Clean the Blue Cleaning Roller ② Power Adapter ③ Font Troubleshooting ④...
- If you observe strange smoke, odor, or noise from the printer, unplug it immediately and contact your dealer. - Use only the specified adapter. ※ Do not use adapters from other devices, e.g. laptop, monitor, game console. JAVELIN DNA User Guide Manual...
Not following this caution can cause service interruption or product damage. -Product Overview Thank you for purchasing the JAVELIN DNA, JAVELIN DNA Pro. Installation/ - Do not install the printer on an unstable surface. This printer is designed to print cards quickly and easily according to your specifications.
Names of Parts -JAVELIN DNA (Manual Feeding, Single-sided Printing) Name Description Name Description LCD Display Displays the printer’s operation status on the LCD screen. Ethernet Port Used to connect to a network using a LAN cable. OPTION Mobile Connector Used for inserting mobile chips.
Right Side Cover Open to replace the main board or fix errors. Power Switch Turns the printer on/off. Card Eject Button Releases the card inside the printer. Ribbon Set Button Replace or reposition the ribbon. JAVELIN DNA User Guide Manual...
Release the card inside the printer. Lock Connector Link Used to connect the Back Cover to the Input Hopper Lock. Side Cover Open Section Press to open the Side Cover. Ribbon Set Button Replace or reposition the ribbon. JAVELIN DNA User Guide Manual...
Release the card from inside the printer. OPTION Lock Connector Link Used to connect the back cover to the Input Hopper Lock. Ribbon Set Button Replace or reposition the ribbon. Side Cover Open Section Press to open the Side Cover. JAVELIN DNA User Guide Manual...
Release the card inside the printer. Lock Connector Link Used to connect the Back Cover to the Input Hopper Lock. Side Cover Open Section Press to open the Side Cover. Ribbon Set Button Replace or reposition the ribbon. JAVELIN DNA User Guide Manual...
Release the card from inside the printer. OPTION Lock Connector Link Used to connect the back cover to the Input Hopper Lock. Ribbon Set Button Replace or reposition the ribbon. Side Cover Open Section Press to open the Side Cover. JAVELIN DNA User Guide Manual...
Ribbon RFID Tag ribbon. - If the cleaning roller is not cleaned properly, then the card may be printed unevenly or with marks across the card. This may also cause serious damage to parts (e.g. print head). JAVELIN DNA User Guide Manual...
- If IC Cards are not placed correctly, then an error will occur. - Make sure that the IC chip is facing the outside. - If IC Cards are not placed correctly, then an error will occur. JAVELIN DNA User Guide Manual...
- The hinge is lifted when the card is loaded into the printer. small quantity of cards (e.g. VIP membership cards) without removing the cards loaded in the input hopper. Before the card is loaded When the card is loading JAVELIN DNA User Guide Manual...
When loading Mag. stripe cards, make sure the magnetic stripe is facing down and on the left side as shown in the pictures. -Ribbon Lock OPTION 1. Use the Lock Key to lock the Top Cover. JAVELIN DNA User Guide Manual...
Lower the Output Stacker cover until it latches as shown in the picture. Use this method when printing a small quantity of cards and check the more than 50 cards, and results right away. up to 60 cards can be loaded in this way. JAVELIN DNA User Guide Manual...
1. Insert the CD into the PC’s CD-ROM drive, and the setup program will (Single, Double-sided Printing) start automatically. If the program does not start automatically, then go to the CD-ROM drive’s root directory and run “install.exe” manually. Power Cable JAVELIN DNA User Guide Manual...
3. Select the option to install and click “Next” to proceed. (Printer driver will be installed by default, for Network driver tick both options) 7. Go to “Devices and Printers” and make sure “NBS Technologies Javelin Driver” has been installed.
Page 19
Click “Next” to continue. 3. Select the Printer driver & Network driver options to install the and click “Next” to proceed.(Connect a LAN cable Javelin DNA series and select “Network Software”) 5-2. Manual Installation If the printer's IP address is not shown as in the picture, then check the following.
Page 20
IP address range or the printer is not via USB". connected to the network. You will need to check your network settings. 6. Click “Finish” to complete the installation process. JAVELIN DNA User Guide Manual...
DHCP Mode is enabled. 3) Network Setting - Automatic (DHCP supported) 1. Go to “Start → All Programs → NBS TECHNOLOGIES → Network” and click OK to open the settings window. 2. In the Network Configuration window, click “Search” to search the connected network board.
Page 22
DHCP server, and there is no need to set the values. a new IP address from the server. 5. Set the Local Port to 9200 (cannot be changed). 8. Click "Exit" to complete the network configuration process. 6. Check the DHCP Mode. JAVELIN DNA User Guide Manual...
Retrieve the IP Address, Subnet Mask and Gateway to be used by the printer from the network administrator. 1.Go to “Start → All Programs → NBS TECHNOLOGIES → Network” and click “OK” to open the settings window. 2. Select the MAC address from the Board List.
Click “Start” to install the program. 8. Click "Exit" to complete the network configuration process. 3. Select the option to install and click “Next” to proceed. 4. Read the Terms of Use and check “Agree”. Then, click “Next” to proceed. JAVELIN DNA User Guide Manual...
PC. Printers on other networks are not included in the list. Click “Next” to proceed. Go to Control panel → Uninstall Program → Select NBS Technologies Javelin Driver on the list → Select uninstall. 6. Click “Finish” to complete the installation process.
USB Port: CITUSB (Local Port) 1. Go to “Hardware and Sound → Devices and Printers” in the “Control Panel”. 2. Right-click “NBS Technologies Javelin Driver” and select “Properties (or Printer Properties)”. Network Port: Refer to "Configure Network Settings" (P40) and select the port (IP Address) accordingly.
1. Go to “Hardware and Sound → Devices and Printers” in the “Control Panel”. 4. Select “Hopper Option” and click “Save” to save the new settings. 2. Right-click “NBS Technologies Javelin Driver” and select “Printing 5. Click “OK” to close the General Setting tab.
2. Select “Print” on the Windows Photo Viewer to open the print window. Make sure that the NBS Technologies Javelin Driver is selected and specify the -Configure Printer Default Settings in Input Hopper using the paper size menu.
Overlay Panel -Full Overlay /No Overlay /Selected Area /Use Image File -Smart Card ISO /Smart Card AFNOR /Magnetic Card Using the printer command Check the box for more stability when using Javelin DNA series. (TPCL) 2.0 JAVELIN DNA User Guide Manual...
Dithering of the ribbon. Reverse Print Reverse the document. Print a mirror image of the document (flipping the image Mirror Print horizontally). Printing the color Prints any Colour text in black. text to black ribbon(K) JAVELIN DNA User Guide Manual...
Synchronizes the ribbon. It performs the same function as the Ribbon Sync “RIBBON SET” button. Removes the error status of the printer. This does not solve any errors, Initialize Errors but only removes the status so it can process the next command. JAVELIN DNA User Guide Manual...
Page 32
Check IP Address & Print Test Card -Check IP Address 1. Hold down both the “EJECT” and “RIBBON SET” buttons until “USER MODE” is indicated on the LCD display. IP/SUB/GATEWAY NETWORK CONFIG STAND-BY MODE USER MODE STAND-BY MODE JAVELIN DNA User Guide Manual...
Page 33
MODE” is indicated on the LCD display. 3. Insert a single card into the slot or load it on the Input Hopper. 4. Right-click “NBS Technologies Javelin Driver→ Printing preferences→ Control tab→ Direct Printer Control → Self Printing” STAND-BY MODE USER MODE 4.
Page 34
- Make sure that the printer is dry before turning it on. Do not use any liquid/gel containing a high content of alcohol or solvent to clean Caution the printer as it may cause discoloration or fissure on its surface. JAVELIN DNA User Guide Manual...
Page 35
1) Check the Proper Use of CR80 Cleaning Card / Long-T Cleaning Card until the LCD display indicates that the printer is in “USER MODE”. CR80 Cleaning Card Insert the CR80 Cleaning Card to the Single Card Slot as shown in the picture. STAND-BY MODE USER MODE JAVELIN DNA User Guide Manual...
Page 36
9. Hold down the "EJECT" button to go into Stand-by Mode. DIAGNOSIS 7. Hold down the “RIBBON SET” button until cleaning starts. The cleaning card will be ejected after it moves back and forth 10 times. STAND-BY MODE CLEANING JAVELIN DNA User Guide Manual...
Page 37
2. Go to "Control Panel → Hardware and Sound → Devices and Printers" and right-click the "NBS Technologies Javelin Driver" driver icon. Then, select "Printing preferences". Do not use any liquid/gel containing a high content of alcohol or solvent to clean the printer as it may cause discoloration or fissure on its surface.
Page 38
TPH Up/Down Check the TPH up/down module. movement fails or is Failure interrupted. Check the temperature of the Abnormal TPH The TPH thermistor TPH thermistor (operating temp.: Thermistor Temperature is 0c°~70c°). Temperature abnormal. Replace the TPH. JAVELIN DNA User Guide Manual...
Page 39
(Install the TPH in reverse order of the removal steps.) 2. While pressing down the black bar above printhead, push the TPH by its body upwards and forwards. Taking care not to touch the ceramic edge of the printhead. JAVELIN DNA User Guide Manual...
Page 40
2. Keep the cover open and remove the output card hopper(stacker). (For Javelin DNA, remove the front cover deco) 2. Rotate the knob to remove any jammed card inside the path as shown in the picture.
Page 41
Exist ⑤ Miscellaneous Code Code Name Description Solution Media Error The media error Check the card (media) and occurs. path sensor status. An EEPROM read/ EEPROM Error Reboot or replace the EEPROM. write error occurs. JAVELIN DNA User Guide Manual...
Page 42
1000 Prints/Roll Code Code Name Description Solution Metallic gold 1000 Prints/Roll SAM Module SAM module Check the SAM B/D interface Response Timeout communication fails. Metallic silver 1000 Prints/Roll and SAM B/D. KO(black overlay) 500 Prints/Roll JAVELIN DNA User Guide Manual...
Page 43
-Optional Input Hopper(increase the capacity from 100 to 200 cards) - Input Hopper Lock (JAVELIN DNA Pro) - Only requires a small space. - Ribbon Lock - Easy to carry (JAVELIN DNA Pro: 4.5kg) - Kensington Lock (for theft prevention of the printer) High Level of Security - Wi-Fi...
Page 44
- The product is damaged by a natural disaster (e.g. earthquake, flood). - The product is damaged from unauthorized repair or modification. - Consumable parts are consumed (according to the company policy). - The product is damaged by the use of unsupported cards. JAVELIN DNA User Guide Manual...
Page 45
Pb, Cd, Hg, CR+6, PBB, PBDE to the beat of our knowledge, Thereby our products are in accordance with RoHS2 Directive. - Directive 2002/95/EC - Directive 2005/717/EC - Directive 2005/747/EC JAVELIN DNA User Guide Manual...
Page 46
This document is the copyright of NBS TECHNOLOGIES Co., Ltd. and may not be reproduced in full or in part by any means, electronic or otherwise, without the prior written consent of NBS TECHNOLOGIES Co., Ltd. The Company would be very grateful if any accidental inaccuracies could be pointed out to us, as well as any other constructive criticism which might lead to a better understanding.