Product Description - NBS Technologies ImageMaster D-40 Operation Manual

D-40 Operation Manual
Chapter 1 - General Description
The following is provided to introduce your new ImageMaster™ D-40 printer.

1.1: Product Description

The ImageMaster™ D-40 printer is a table top, high speed, thermal card printer. The D-40
offers dual sided printing with parallel card processing capability. The D-40 is capable of
producing cards at speeds up to 4000 cards per hour (cph) single sided and 1200 cph in dual
sided mode. The D-40, as an option, supports magnetic strip encoding and programming of
the embedded chip on a Smart Card. It has 500 card capacity input and output hoppers. It
features large capacity roll of printing ribbon, capable of printing up to 12,000 cards per roll
(with 3" (7.62cm) of printing per card).
Physical Dimensions
Height:
Width:
Depth:
Weight:
Power requirements
110-230VAC, 50/60 Hz, ? Amp Slow-Blow
FCC Class B, CE, and ETL approved
Operating Environment
Temperature range: 58
Relative humidity:
Storage temperature: 23
Storage humidity:
Plastic Cards Accepted
Type:
Card Size:
Card Thickness: 0.024" to 0.030" (0.61 mm to 0.76 mm)
Print Resolution
300 dots per inch (dpi) (11.8 dots per mm)
monochrome printing - up to 4000 single sided cph or 1200 dual sided cph
Maximum Print
0.100" +/- 0.010" from side edges of card
0.100" +/- 0.015" from top and bottom edges of card
Chapter 1 Page 1
23 inches (585 mm)
24 inches (610 mm)
16 inches (407 mm)
70 lbs (23.6 kg)
0 0
F to 80 F (15
20 to 65% non-condensing
0 0
F to 158 F (-5
20% to 70% non-condensing
PVC & composite PVC - including breakaway, key cards, & clear cards
ISO 7810 (CR-80) - 3.375" x 2.125" (86 mm x 54 mm)
0 0
C to 30 C)
0 0
C to 70 C)
1-1
General Description