Table of Contents
Advertisement
D-40 Operation Manual
4.7: Utility / File / Create or Edit / Layout (Barcode
Parameters)
Barcode Name.........
X coordinate............
Y coordinate............
Height......................
Guard Height..........
Ratio.........................
Density.....................
Gap...........................
Orientation..............
Human Readable...
Card Side.................
Transfer...................
Accept......................
Figure 4-13: Basic Default Menu for Barcode Parameters
4.7.1: Barcode Name
Similar to "Font Name", "Barcode Name" gives a list of all available barcode formats stored in the
firmware of the D-40 printer. Any may be selected by pressing the left/right arrow keys until the
desired barcode format is displayed.
4.7.2: X & Y Coordinates
The next two parameters – "X & Y coordinates" – work together to determine the starting points
of the field in inches. They are referenced in relation to an imaginary point (origin) in the upper
left hand corner of the card. The placement of the field (along with font size and steps) affects
the number of characters, which may be printed. The "X & Y coordinates" refers to its baseline
position.
4.7.3: Height
"Height" refers to the height of the barcode line. (This relates to the Y coordinate.) The
maximum any line can be is 2.25 inches.
Chapter 4 Page 15
Code 39 / UPC-A / Codabar /Code 128 / 2 of 5 / EAN 13 /
EAN 8 / New UPC-A
0.25
0.25
0.40
0.50
3.00
3
3
Horizontal / Vertical /Reverse Hor / Reverse Vert
No / Yes
Top or Bottom
Off / Destination on / Source on
Fixed / Variable / Host
4-15
Creating Layouts
Hide quick links:
Advertisement
Table of Contents
