Section 5
8. In the Update Library Firmware Using FTP area, verify that the Remote FTP Server is
selected and click Start The Update.
Both the web page and front touch screen show the progress of the upgrade. Wait
approximately 2 minutes while the CRC is verified, the BIN file is installed, and the CRC is
reverified.
9. Upon completion of the update, the library automatically reboots. Wait until the POST
process completes before relogging onto the system.
NOTE:
5–2
If the update fails, an error message is displayed. Refer to Section 3, "Troubleshooting and
FSCs" for information about the error.
10400025-101 10/2006