Section 3
3.3 Tape Drive Removal
While troubleshooting the library, it may become necessary to remove the tape drive assembly for
examination. Follow this procedure to correctly and safely remove the assembly:
1. At the OCP, press Power > Power Off Library to power down the unit.
2. After the unit has shut down, remove the power cord.
3. At the rear, remove the LVD SCSI cable and terminator from the drive cover SCSI ports
(Figure
3–16
Figure 3-13: Level 3 Escalation ERP
3-14).
Level 3
Escalation
Save a Library Trace at
the point of failure. Save all
system information, version
information, system logs, and
application logs .
Notify technical support
and wait for patch.
Apply library or system patch.
No
Problem
resolved?
Yes
END
(Resume normal operation)
10400025-101 10/2006