Touch Screen Forced Recalibration; Touch Screen Contrast Reset - Overland Storage ARCvault Series Service Manual

Section 3

3.4.1 Touch Screen Forced Recalibration

1. Cycle the unit's power.
2. At the startup screen, press
the following sequence:
a. Upper right corner
b. Lower left corner
c. Upper left corner
d. Lower right corner
3. Following the on-screen
instructions, press the boxed X at the lower left of the screen, and then press the boxed X at
the upper right.
The screen should now be recalibrated and ready to use.

3.4.2 Touch Screen Contrast Reset

1. Cycle the unit's power.
2. At the startup screen, press
the following sequence:
a. Upper right corner
b. Lower right corner
c. Upper right corner
d. Upper left corner
The screen is returned to the default
setting of 32. Use Setup > Utilities > Diagnostics > Screen Calib to make any changes.
3–18
c
b
d
a
d
a/c
b
10400025-101 10/2006