Exchanging A Chassis; Removing The Old Chassis; Figure 4-6: Left And Right Media Magazines - Overland Storage ARCvault Series Service Manual

CAUTION: Keep a loaded magazine level. Tilting the magazine can result in the tapes falling out and
possibly being damaged. Also, don't hold a magazine by just the handle; use both hands to support it.
1. At the OCP Default screen, press Media > Mag Access.
Wait for the robotics to come to a complete stop.
2. Press the unlock button for the magazine being replaced.
3. Open the door and carefully remove the magazine.
4. If necessary, transfer any cartridges to the new magazine.
5. Carefully slide the new magazine into the library until it latches.
6. Close the door.
7. If necessary, repeat Steps 2–6 for the other magazine.
8. Press Back once.
Wait while the library automatically inventories the magazine.
9. Press Back again to return to the Default screen.

4.4 Exchanging a Chassis

When a problem cannot be isolated to a replaceable part such as a drive, the entire chassis is
swapped out to quickly fix the problem.

4.4.1 Removing the Old Chassis

To replace a chassis, you must remove the drive assembly and the media magazines
10400025-101 10/2006
Left

Figure 4-6: Left and Right Media Magazines

Adding or Replacing Components
Right
(Figure 4-7).
4– 5