Removing Magazines; Removing The Unit From Rack; Figure 4-7: Arcvault 24 Components To Be Removed - Overland Storage ARCvault Series Service Manual

Section 4

4.4.1.1 Removing Magazines

CAUTION: Keep a loaded magazine level. Tilting the magazine can result in the tapes falling out and
possibly being damaged. Also, don't hold a magazine by just the handle; use both hands to support it.
1. Press Operations > Mag Access > Unlock All.
2. Open the right door and remove the right magazine.
3. For an ARCvault 24, open the left door and remove the left magazine.

4.4.1.2 Removing the Unit from Rack

1. Power down the unit.
2. After the unit has shut down, at the rear
• Power cord
• LVD SCSI cable
• SCSI terminator
• All management port cables.
3. At the front, open the doors and loosen the retaining screws inside
4–6
Magazines

Figure 4-7: ARCvault 24 Components to be Removed

WARNING: It is recommended that a mechanical lifter (or at least two people) be used to
prevent injury during the removal from and the reinsertion into the rack.
(Figure 4-1), remove these items:
Drive Assembly
(Figure 4-8).
10400025-101 10/2006