Registering The Sender Name (Originator) - Oki MC363 Advanced Manual

Registering the Sender Name (Originator)

You can change the sender name (originator) that is printed on a sent fax. To change the
name, you must register the originator name in advance.
Before using the following function, check that the [TTI] setting is enabled.
Disclosing a Sender Name (Originator) to the Recipient
Only use alphanumeric characters for [Sender ID].
If you set [Sender ID], the name is automatically registered to [TTI 1].
Easy Setup
You can register up to three sender names (originators).
1
Press the (SETTING) button on the operator panel.
2
Press the button once to select [Admin Setup] and press the
3
Enter the administrator password, and then press the
The factory default administrator password is "999999". If the administrator password is changed, enter the
updated password.
4
Press the button to select [User Install] and press the
5
Press the or button repeatedly to select [TTI Register/Edit] and press
the button.
6
Select the sender ID to register, and then press the
7
Enter a name.
You can enter up to 22 characters.
8
Select [Enter], and then press the
9
Press the button until the home screen is displayed.
button.
(OK) button.
button.
button.
(OK) button.
Disclosing a Sender Name (Originator) to the Recipient
Changing the Sender Name That is Printed on Faxes
- 153 -
5. Fax