Saving Scanned Data To A Computer; Changing The Machine Settings - Oki MC363 Advanced Manual

Saving Scanned Data to a Computer

This section describes how to save scanned data to a computer.
Use Scan To Computer function of the machine or use software of the computer to scan.
To scan, use one of the following software.
For Windows
ActKey: To be installed if you install software from [Install Optional Software].
WSD: Preinstalled on Windows.
For Mac OS X
Image Capture: Supplied with Mac OS X

• Changing the Machine Settings

• Using ActKey
• Using WSD Scan
• Using Image Capture (Mac OS X)
• Using a Scanner Supported Application
• Adding Destination for Scan To Computer
• Deleting Destination for Scan To Computer
Changing the Machine Settings
Enabling Network TWAIN
Enable the Network TWAIN function so that you can use the Scan to Computer function on a
computer that is connected via a network.
1
Press the (SETTING) button on the operator panel.
2
Press the button once to select [Admin Setup] and press the
3
Enter the administrator password, and then press the
The factory default administrator password is "999999". If the administrator password is changed, enter the
updated password.
4
Press the or button to select [Scanner Setup] and press the
5
Press the or button to select [TWAIN Setup] and press the
6
Press the or button to select [Network TWAIN] and check that [ON] is
set.
7
Press the button until the home screen is displayed.
Setting PC Scan mode
Set the scan mode when scanning from a computer. This machine has the following three
scan modes.
- 61 -
3. Scan
button.
(OK) button.
button.
button.