Specifying A Scan Resolution (Resolution); Sending A Fax To Multiple Destinations At The Same Time - Oki MC363 Advanced Manual

Specifying a Scan Resolution (Resolution)

You can select a resolution to obtain the most suitable quality.
1
Press the (FAX) button on the operator panel.
2
Set a document in the ADF or on the document glass.
3
Check that [Fax] is selected, and then press the
4
Press the button to select [Fax Functions] and press the
5
Press the button to select [Resolution], and then press the
6
Press the or button to select the image quality, and then press the
(OK) button.
• [Extra-Fine] may not be available depending on the receiver's machine.
• If you select [Fine], [Extra-Fine], or [Photo], it takes long to scan a document.
7
Press the button until the start screen is displayed.
8
Specify a destination.
Entering Fax Number to Send a Fax (User's Manual)
Specifying a Destination from Phone Book
Specifying a Destination Using One-touch Button
Specifying a Destination from Transmission History and Reception History
9
Change other settings if necessary, and then press the
You can change other settings for fax transmissions.
Setting Scanning for Transmission
Entering Fax Number to Send a Fax (User's Manual)

Sending a Fax to Multiple Destinations at the Same Time

You can send a fax to multiple destinations. You can specify up to 100 destinations by using
the numeric keypad, speed dial, or group list.
1
2
button.
3
button.
4
button.
5
6
7
8
(MONO) button.
• To cancel operation, press the
• A group list is useful when you want to broadcast. Register a group list before sending a fax in advance.
• If [Broadcast Destination] is enabled, destination numbers are displayed before sending.
• You can cancel a fax transmission.
- 148 -
Press the (FAX) button on the operator panel.
Set a document in the ADF or on the document glass.
Check that [Fax] is selected, and then press the
Check that [Add Destination] is selected, and then press the
Press the or button to select the destination, and then press the
(OK) button.
Entering Fax Number to Send a Fax (User's Manual)
Specifying a Destination from Phone Book
Specifying a Destination Using One-touch Button
Specifying a Destination from Transmission History and Reception History
Repeat step 4 to enter all the destinations.
Change other settings if necessary, and then press the
Check the destinations set from the list screen and press the
button.
You can delete specified addresses.
(STOP) button.
Specifying a Destination from Phone Book
Fax Setup
Cancelling a Fax Transmission (User's Manual)
5. Fax
button.
button.
(MONO) button.
(MONO)